https://grandrc.com/     Call Us:  408-782-4184    Email Us:  support@grandrc.com
Quick Find:    
MAIN MENU
Closeout!
Elec. Helis & Parts
Nitro Helis & Parts
Heli Combos
Quadcopters
Batteries/Chargers
Bearings/Screws
Electric Motors
Electronics
 - Tester
 - BEC
 - Gyros
 - Flybarless Contollers
 - Servos
 - ESC
 - Eagle Tree
 - Governors
Kasama
KDE
Engines & Parts
Radios/Receivers
Tools & Misc.
QuickUK
Blades
Canopies and Fuselages
Nitro Accessories
GForce
Wires and Connectors
Scratch&Dent
CLEARANCE
Job Opportunities
Comments more
Write ReviewWrite a review on this product!
Links more
RunRyder
Customer Service more
The Support System is currently Disabled
  Top » Catalog » Electronics » Flybarless Contollers » HC3-SX

bavarianDEMON 3SX (HC-3SX)

 [HC3-SX]
 MAP $379.00 

Description

bavarianDEMON 3SX (HC-3SX)

he bavarianDEMON 3SX is a high-quality, compact designed Flybarless system (Rigid) and replaces the mechanical flybar on the rotor heads of all current RC helicopters. Additionally this unit features the well-known and patented Horizontal mode (self-leveling), which brings the heli back to horizontal attitude anytime you let go off the sticks.Moreover, the system is equipped with several safety features, leveling the heli back even while in hard 3D-maneuvers like Tic-Toc or PiroFlip with a speed never seen before.
These brand new features enable a pilot to learn 3D flying in the most safe way ever, speaking of a kind of “real-flight simulator” on highest level.
The stabilization sensitivity (gain) as well as engaging or disengaging this function can be controlled via an auxiliary channel from the transmitter while in flight.

Because they are lighter, helicopter models without auxiliary paddles are much more agile and maneuverable, and are approx. 15% more powerful. In combination with the 3SX, huge performance is delivered, without the need to adjust the fragile paddle mechanism.

The all-round precision is outstanding, whether it is the extremely dynamic maneuvers (F3N flying style), aerobatics (F3C), or hovering stability. All maneuvers are performed with directional stability, i.e. with no disruptive influences at all, and with maximum stopping performance. This is achieved with minimum need for adjustment thanks to the intelligent and optimized control algorithms.

By means of the latest-generation high-quality silicon MEMS gyros, the 3SX has full 3D capability, whilst boasting a top-quality, ultra-fast tail gyro. No external gyro is required. In addition, a symmetrical torque control unit is in place there. The resultant further increase in retention force in the tail was possible because the tail gyro is internally coupled with the pitch data of the rotor head control unit.

Of course, the system is also suitable for flybarless scale helicopters (twin- and multi-blade) as well as all other flybarless helicopters such as trainers, etc., and, due to the possibility of engaging the Horizontal mode at any time, perfectly suitable for beginners.

The 3SX can be used for helicopters with electric motors or nitro/combustion engines as well as turbine models (in case of a turbine inside a scale canopy, please see the safety instructions in the manual on p.10!).

All current analogue, digital and brushless servos are supported, including narrow-pulse servos (760s) for the tail (e.g. Robbe-Futaba S 9251 and BLS 251). All current swashplate variants are also supported, including four swash servos and virtual swashplate rotation (H1, H3-90°, H3-120°, H3-140°, H4-90°, H4-90°+45°).

The system can also be used as a pure tail gyro, without the need of any additional accessories. Especially if a new heli project is planned, first using a flybar, later on switching to a flybarless head, the purchase of an external tail gyro is not necessary. Simply set the Rigid gains in the PC software to „0“, so the Rigid mode is disabled. The swash mixing is done by the 3SX, so even a simple transmitter can be used.

The CNC-milled aluminium casing and the high-quality design comfortably meet the current quality standards of major helicopter manufacturers. The highly compact construction and the flexible installation possibilities enable use in almost every helicopter, from micro-copters through to 3.5m scale helicopters.

• Set-up work is reduced to a minimum, partly because of clear separation of the sensitivity settings for the head and tail gyros in independent auxiliary channels.
• Can be used as pure tail gyro without the need of additional accessories.
• Direct USB connection for fast programming; the easy-to-use set-up software comes as standard.
• The connecting cables between the receiver and 3XS are plugged in on both sides.
• Gold-plated circuit-board and the latest-generation MEMS gyros for all 3 axis.

• The 3SX features direct connection to new single-cabled receiver systems: SP serial pulse/PWM output, e.g. the Robbe FASST receiver R6007SP, robbe/Futaba S-BUS and Jeti/Spektrum (no DSMX)/JR-satellites (main receiver not applicable). Consequently, the motor/gas-servo output as well as a second output (e.g. for governor, lighting, retractable landing gear, etc.) are available directly on the 3SX.

• The 3SX is equipped with a flash memory and can therefore be updated in service to the latest software level.

Technical specifications:
Dimensions:                                 36 x 34 x 14 mm
Supply voltage:                            4…10V (2S-LiPo-compatible, min. 5.5V using Spektrum/JR satellites)
Max. roll & pitch rotational speed:    500°/s
Max. tail rotational speed:              650°/s (typical)
Servo frame rate:                         55Hz (analogue) / 220Hz (digital) selectable
Tail servo output:                        1,52ms / 0,76ms (narrow pulse) selectable
Maximum servo currents:              total 10A (continuous load)
Weight:                                     approx. 18g (without cable loom)
Length of connecting cables to receiver:                                 90mm
Made in Germany


 

 

 

 

 

 

 

 

 

 

 

 

 

 

The HC3-SX is a high-quality, compact designed Flybarless system (Rigid) and replaces the mechanical flybar on the rotor heads of all current RC helicopters. Additionally this unit features the well-known and patented Horizontal mode (self-leveling), which brings the heli back to horizontal attitude anytime you let go off the sticks.Moreover, the system is equipped with several safety features, levelling the heli back even while in hard 3D-manoeuvres like Tic-Toc or PiroFlip with a speed never seen before.
These brandnew features enable a pilot to learn 3D flying in the most safe way ever, speaking of a kind of “real-flight simulator” on highest level.
The stabilisation sensitivity (gain) as well as engaging or disengaging this function can be controlled via an auxiliary channel from the transmitter while in flight.

Because they are lighter, helicopter models without auxiliary paddles are much more agile and manoeuvrable, and are approx. 15% more powerful. In combination with the HC3-SX, huge performance is delivered, without the need to adjust the fragile paddle mechanism.

The all-round precision is outstanding, whether it is the extremely dynamic manoeuvres (F3N flying style), aerobatics (F3C), or hovering stability. All manoeuvres are performed with directional stability, i.e. with no disruptive influences at all, and with maximum stopping performance. This is achieved with minimum need for adjustment thanks to the intelligent and optimised control algorithms.

By means of the latest-generation high-quality silicon MEMS gyros, the HC3-SX has full 3D capability, whilst boasting a top-quality, ultra-fast tail gyro. No external gyro is required. In addition, a symmetrical torque control unit is in place there. The resultant further increase in retention force in the tail was possible because the tail gyro is internally coupled with the pitch data of the rotor head control unit.

Of course, the system is also suitable for flybarless scale helicopters (twin- and multi-blade) as well as all other flybarless helicopters such as trainers, etc., and, due to the possibility of engaging the Horizontal mode at any time, perfectly suitable for beginners.

The HC3-SX can be used for helicopters with electric motors or nitro/combustion engines as well as turbine models (in case of a turbine inside a scale canopy, please see the safety instructions in the manual on p.10!).

All current analogue, digital and brushless servos are supported, including narrow-pulse servos (760s) for the tail (e.g. Robbe-Futaba S 9251 and BLS 251). All current swashplate variants are also supported, including four swash servos and virtual swashplate rotation (H1, H3-90°, H3-120°, H3-140°, H4-90°, H4-90°+45°).

The system can also be used as a pure tail gyro, without the need of any additional accessories. Especially if a new heli project is planned, first using a flybar, later on switching to a flybarless head, the purchase of an external tail gyro is not necessary. Simply set the Rigid gains in the PC software to „0“, so the Rigid mode is disabled. The swash mixing is done by the HC3-SX, so even a simple transmitter can be used.

The CNC-milled aluminium casing and the high-quality design comfortably meet the current quality standards of major helicopter manufacturers. The highly compact construction and the flexible installation possibilities enable use in almost every helicopter, from micro-copters through to 3.5m scale helicopters.


• Set-up work is reduced to a minimum, partly because of clear separation of the sensitivity settings for the head and tail gyros in independent auxiliary channels.

• Can be used as pure tail gyro without the need of additional accessories.

• Direct USB connection for fast programming; the easy-to-use set-up software comes as standard.

• The connecting cables between the receiver and HC3-Xtreme are plugged in on both sides.

• Gold-plated circuit-board and the latest-generation MEMS gyros for all 3 axis.

• The HC3-SX features direct connection to new single-cabled receiver systems: SP serial pulse/PWM output, e.g. the Robbe FASST receiver R6007SP, robbe/Futaba S-BUS and Jeti/Spektrum (no DSMX)/JR-satellites (main receiver not applicable). Consequently, the motor/gas-servo output as well as a second ouput (e.g. for governor, lighting, retractable landing gear, etc.) are available directly on the HC3-SX.

• The HC3-SX is equipped with a flash memory and can therefore be updated in service to the latest software level.





Technical specifications:
Dimensions:                                 36 x 34 x 14 mm
Supply voltage:                            4…10V (2S-LiPo-compatible, min. 5.5V using Spektrum/JR satellites)
Max. roll & pitch rotational speed:    500°/s
Max. tail rotational speed:              650°/s (typical)
Servo frame rate:                         55Hz (analogue) / 220Hz (digital) selectable
Tail servo output:                        1,52ms / 0,76ms (narrow pulse) selectable
Maximum servo currents:              total 10A (continuous load)
Weight:                                     approx. 18g (without cable loom)
Length of connecting cables
to receiver:                                 90mm

Made in Germany !

Extra Info

Comments
There are currently no product reviews
Write a review on this product!


Extra Info
This product was added to our catalog on Thursday 14 February, 2013.
Notify me of updates to bavarianDEMON 3SX (HC-3SX)
Tell someone you know about this product.


 Add to Wish List 
 MAP $379.00  Quantity:        
Customers who bought this product also purchased
Shopping Cart more
0 items
Wishlist more
My Wish List [+]
Wish List Help [?]
Specials more
HC7570 700E Painted Canopy (Open box)
HC7570 700E Painted Canopy (Open box)
 $65.99  $39.99 
H1100 35mm Pull-Pull Cable Wheel - FUTABA / ALIGN
H1100 35mm Pull-Pull Cable Wheel - FUTABA / ALIGN
 $8.48  $5.94 

110-330 Fuel Tank
 $8.99  $4.50 
BAT735 3S1P 11.1V 850mAh/30C HBP85001
BAT735 3S1P 11.1V 850mAh/30C HBP85001
 $14.99  $11.24 

100-351 M3 Nylock nut
 $1.50  $0.75 
Notifications more
NotificationsNotify me of updates to bavarianDEMON 3SX (HC-3SX)